CODA Coriolis Mass Flow Pump System
With the CODA Coriolis Mass Flow Pump System, there is no need to source a pump and meter or develop a control system. This fully integrated system is compatible with a wide range of liquids from 1 kg/h to 100 kg/h full scale with precision accuracy of ±0.2% of reading. You get mass flow and volumetric flow precisely measured, by supplying pressure from the pump.
Request a quote
Specs, features, and customization options
Specs
Highest possible accuracy and responsiveness with custom ranging — included with every system.
CODA KG-Series performance
- Full scale ranges: 1 kg/h to 100 kg/h
- Measures and controls mass or volumetric flow
- Steady state control range: 2%–100% of full scale
- Accuracy calibration, NIST-traceable (liquid): ±0.2% of reading or ±0.05 of full scale, whichever is greater
- Repeatability: ±0.05% of reading or ±0.025% of full scale, whichever is greater
- Control response time:
1–10 kg/h: <1500 ms (T63)
30–100 kg/h: <1500 ms (T63) - Operating temperature: -35 to 70°C
- Density accuracy ±5 kg/cubic meter
Device features and accessories
Features
- Measure and control true mass flow, even when fluid composition is changing or unknown.
- Batching and dosing built-in: deliver a precise preset amount of fluid, then stop flowing.
- Integrated pump produces liquid flow in situations where you don’t have a pressurized source.
- Bypass valve increases turndown ratio and stabilizes flow
- Measures densities from 100 to 2,000 kg/m3
- Insensitive to external vibrations to mitigate process disturbances.
- With high accuracy option, you can mix at ultra-low flows.
Accessories
Power supply, cables, and accessories sold separately
Device Ranges & Full Specs
Full scale flow rates range from 1 kg/h to 100 kg/h with controllable ranges of 2% to 100% of full scale.
- To learn about additional custom flow ranges, please contact Alicat. Highest possible accuracy and responsiveness with custom ranging—included with every system.
- For specs on all devices, see the CODA mass flow pump system specs.
For a comprehensive device guide, read the CODA operating manual.
Build and Performance Options
- Communication: ASCII and Modbus RTU over RS-232 or RS-485
- Wetted materials: 316L stainless steel, PEEK, and FKM standard; nickel alloy and FFKM optional. Consult Alicat for additional wetted materials options.
- Ingress protection: IP40
Related Models
Additional Resources
Need support?
Our expert team of applications engineers is available to provide additional information, discuss your application, or answer any questions you may have.
Email, call, or chat with an applications engineer
