IS-Pro: Intrinsically Safe Pressure Controllers & Transducers for Explosive Environments

Unsurpassed ease of pressure control in your hazardous process

Gain superior nuance of control, and speed of response, in CID1 applications. The IS-Pro series of gas pressure controllers and pressure gauges come with ATEX/IECEx and North American certifications to operate in Class I, Div 1 or Class I, Zone 0 areas.

Accuracy of flow from ±0.125% of full scale to ±0.25% of full scale
98-129 field-selectable gas calibrations
Easy-to-read display verifies your process instantaneously
Digital MODBUS or ASCII, or analog communications

Quote Request | Downloads↓ | Certifications↓

Quick Specs

Standard accuracy NIST-traceable calibration:	±0.25% of full scale
High accuracy NIST-traceable calibration:	±0.125% of full scale
Communication protocols	Alicat ASCII and Modbus-RTU over RS–232 or RS–485
Analog Communication	4-20 mA
Measurement & control ranges	0.01% – 100% of full scale (10,000:1 turndown)
Compatible gases	All non-corrosive gases (caustic gas resistant materials optional)
Operating temperature range	-20 °C to +70 °C
Maximum common mode usage pressure	≥100 PSID models: 200 PSIG 500 PSID models: 750 PSIG
Ingress Protection	IP66
Typical control response time:	as fast as 30 ms
Warm-up time:	<1 s

Build Options

High pressure options	Up to 1500 PSIG
Process connections	NeSSI SP76 compatible; M5, 10-32”; 1/8”, 1/4“ NPT; BSPP, SAE, and VCR
Media-isolated (caustic gas resistant materials)	For up to 129 gases, including 31 caustic gases. Wetted Materials: 302, 303, 304, 316L, 430FR stainless steel; FKM, alumina ceramic, glass, gold, heat-cured epoxy, heat-cured silicone rubber, polyamide, silicon
Displays	Backlit monochrome or no display
Calibration:	High-accuracy (see Quick Specs)

Downloads

Brochure

Certifications

Intrinsically safe certifications for Alicat Instruments

Included with each device

Valve close override and valve open override: Utilize alarms to quickly vent your system or stop all flow as needed.
Monochrome backlit LCD with integrated touchpad: Easily read measurements using the backlit display and control configurations with the user-friendly integrated touchpad.
Autotune: Automatically improve the control performance of the valve and tune the control parameters of the device for your application.
User-adjustable setpoint ramping & limits: Configurable ramp rates allow the process variable to be controlled as fast or as slow as desired, and configurable setpoint limits protect processes from inadvertent setpoint changes.
User-adjustable standard temperature and pressure (STP) conditions: Quickly change reference conditions without the need for recalibration.

Visit the device customization page

Accessories | Sold separately

Process port fittings and filters
Required barriers for power supply and communication

Visit the accessories page

Not exactly what you’re looking for?

Check out our other flow or pressure control and measurement solutions.
Our expert team of applications engineers is available to provide additional information, discuss your application, or answer any questions you may have.

Contact an applications engineer

IS-Pro certified intrinsically safe pressure controller for explosive environments

Learn More

Specs

Ask a question