BASIS™ Gassing Module

 

Compact gas control solutions for OEM products

Use custom-built gassing modules to simplify your engineering and save space.

  • Built to your process
  • Easily connect to PC or PLC
  • Wide range of fittings
  • High performance in a small package

FULL SCALE FLOW RANGES

100 SCCM – 100 SLPM

Available variants

Miniature Gassing Module with BASIS mass flow controllers from Alicat Scientific for OEM applications.

Custom gassing modules

Using simple commands to this gas module, effortlessly mix gases into various mediums, from cell mediums in bioreactors to furnaces for glass melting. Enhance this gassing module’s versatility with optional accessories and software. Collaborate with our expert engineering team to design efficient, ready-to-use solutions tailored to your process.

Key specifications for individual units include:

  • ± 0.25% flow reading repeatability
  • ± 1.5% flow reading accuracy (gas-dependent)
  • As fast as 100 ms control response

Contact Alicat to build your solution today.

Small gassing module using BASIS mass flow controllers from Alicat Scientific

Build Options

Communication Protocols
RS-232 Serial
RS-485 Serial
Analog
(4-20 mA or 0-5 Vdc)
Modbus RTU (over RS-232 or RS-485)
Displays
None
Process Connections
NPT or SAE
Ingress Protection
IP40

Downloads

Manuals

BASIS Meters and Controllers Operating ManualLatest – BASIS 2

Brochures

BASIS Brochure

Software/Utilities

FlowVision 2.0

Serial Terminal Utility

Applications

bioreactor flow

Compact Gassing Modules Simplify Benchtop Bioreactors

 This streamlined, efficient solution not only simplifies the control of flow rates but also optimizes them, providing highly repetitive and fast gas control. 

Bioprocessing mass flow controller

Lowering cost and increasing speed of biologics production

Ensure your process is repeatable and scalable.  BASIS provide accurate and responsive gas flow with a large turndown ratio and integrated gas selection.  The number of spares required is reduced without sacrificing performance.

mixing fluids

Gas mixing in molar ratios

Use BASIS mass flow controller’s intuitive serial commands to make gas mixtures in molecular proportions, and stop paying premiums for custom mixes.

Glass manufacturing requires high precision mass flow controllers

Ensure consistent batches in glass production

BASIS mass flow devices are used in burner control applications to control gases that heat the glass and facilitate drawing. Scripting and electronic control make your process repeatable and precise. Great for production of lab-quality and other high-volume, low-variability glass.

FastTrack Ordering

M/MC mass flow meters and controllers that ship in just 3-5 business days.
CALIBRATION
Standard or High Accuracy
DISPLAY
Monochrome, Color, or None
PROTOCOL
Analog, RS-232, RS-485, or Modbus RTU
CONNECTOR
MD8, Locking Industrial, DB9M, DB15
FITTINGS
NPT

METER RANGES

2 SCCM - 500SLPM

CONTROLLER RANGES

2 SCCM - 100SLPM

Service and Support

Whether it is time for your instrument’s annual recalibration or your instrument needs a repair or upgrade,
you can fill out the Service Request Form below, email us, call us, or start a live chat session to get the service process started.

7641 N Business Park Dr. Tucson, AZ 85743

Geograaf 24
6921 EW
Duiven, The Netherlands