- Flow Controllers & Meters
- IS-Max: Intrinsically Safe Mass Flow Meters for Explosive Environments
model
IS-Max: Intrinsically Safe Mass Flow Meters for Explosive Environments
Intrinsically safe mass flow meters
Unprecedented insights into your process
Gain a richness of variables reporting that’s unmatched in hazardous applications. The IS-Max series of gas meters come with ATEX/IECEx certifications.
- Accuracy of flow from ±(0.4% of reading and 0.2% of full scale) to ±(0.8% of reading and 0.2% of full scale)
- 98-129 field-selectable gas calibrations
- Easy-to-read display makes it easy to verify operating conditions in the field and on installation
- Digital MODBUS or ASCII, or analog communications
Quick Specs
Full-scale flow ranges | 0.5 sccm and 5 sccm | 10 SLPM and 20 SLPM | 50 to 5000 SLPM |
Standard accuracy NIST-traceable calibration: | ±0.8% of reading and ±0.2% full scale | ±0.6% of reading or ±0.1% full scale, whichever is greater | ±0.8% of reading and ±0.2% full scale |
High accuracy NIST-traceable calibration: | ±0.4% of reading and ±0.2% full scale | ±0.5% of reading or ±0.1% full scale whichever is greater | ±0.4% of reading and ±0.2% full scale |
Fluids | 98 field selectable gases standard (129 optional) | ||
Measurement & control ranges | 0.01% – 100% of full scale (10,000:1 turndown) | ||
Operating temperature range | -20 °C to +70 °C | ||
Operating pressure | 11.5 – 160 PSIA ISMQ-Series: 11.5 – 320 PSIA |
||
Humidity | 0 – 95% non-condensing | ||
Ingress Protection | IP66 | ||
Communication protocols | Alicat ASCII and Modbus-RTU over RS–232 or RS–485 | ||
Analog Communication | 4-20 mA |
Build Options
Process connections | NeSSI SP76 compatible; M5, 10-32”; 1/8”, 1/4“ NPT; BSPP, SAE, and VCR |
Media-isolated (caustic gas resistant materials) | Wetted Materials: 302, 303, 304, 316L, 430FR stainless steel; FKM, alumina ceramic, glass, gold, heat-cured epoxy, heat-cured silicone rubber, polyamide, silicon |
Displays | Backlit monochrome or none |
Calibration: | High-accuracy (see Quick Specs); custom calibration points |
Downloads
Certifications
Our ATEX/IECEx Intrinsically Safe IS-Max and IS-Pro devices are approved for use in potentially explosive environments:
Included with each device
Multivariate process measurements: Measure Volumetric flow, Mass flow, Absolute pressure, Gauge pressure, Barometric pressure, Temperature, Relative humidity, or Dew point*
-
- Gas Select™: “98 user-selectable gases stored internally. Each gas optimized to match NIST’s REFPROP 10 gas property calculations across the operating temperature and pressure ranges for highest accuracy. For ISMCS devices, there are 128 user-selectable gases stored internally. “
- COMPOSER™: 20 user-definable gas mixes. Each mix may have up to 5 gases with 0.01% composition resolution.
- Monochrome backlit LCD with integrated touchpad: Easily read measurements using the backlit display and control configurations with the user-friendly integrated touchpad.
- User-adjustable standard temperature and pressure (STP) conditions: Quickly change reference conditions without the need for recalibration.
- Configurable flow and pressure averaging: Adjust averaging from 1-255 ms to take control over how instantaneous or smooth measurements will be.
Accessories | Sold separately
- Process port fittings and filters
- Required barriers for power supply and communication
Not exactly what you’re looking for?
- Need a C1D1 flow controller and not a meter? Check out the IS-Max Controller
- Check out our other flow or pressure control and measurement solutions.
- Our expert team of applications engineers is available to provide additional information, discuss your application, or answer any questions you may have.