Optimizing Bioreactor Production
Bioreactors are used in a growing number of applications, from producing bio-adaptive medicines or environmentally friendly fertilizers and pesticides, to brewing beer, refining ethanol and treating wastewater. The increase in biologics production and single use reactors has led to a need for even greater precision and flexibility in instrumentation.
Alicat Scientific’s broad range of mass flow controllers simplifies and streamlines your bioreactor development lifecycle. Using one family of instruments with your choice of communications protocols, you can test conditions at 100 sμlm and then take the same accuracy and precision through the ramp-up to pilot plants and full-scale production at 5000 slpm. Built without hot wires, these MFCs can handle the ingress of liquids without being destroyed, making them well-suited to laboratory experimentation and continuous production use.
Maintaining Consistent Gas Delivery to the Reactor
Though the industrial applications for bioreactors are diverse, all rely upon the controller delivery of air, oxygen, carbon dioxide and/or nitrogen to achieve and maintain optimal growth rates in the biomatter medium. Alicat’s Gas Select feature allows you to use any Alicat Mass Flow Controller (MFC) to control these gases without sacrificing measurement accuracy, which in turn reduces the need to maintain separate inventories of gas-specific mass flow controllers when scaling up. If you are adding or removing bioreactors on the same gas line, you can set the Alicat to maintain a constant pressure throughout the line while still monitoring or totalizing mass flow.
Standard backlit integrated displays make setup and data collection in the lab or troubleshooting in the plant easy and straightforward.
Controlling the Head Space
In certain reactions, when the oxygen in the head space above the biomatter medium is maintained at a higher pressure, the oxygen molecules more easily interact with the biomatter below. This condition can be achieved by using an Alicat Backpressure Controller at the outlet of the bioreactor to maintain an elevated pressure within the reactor. If you also want to monitor or totalize the outgassed mass, an Alicat mass flow controller can be configured to control the backpressure while at the same time measuring the flow through it. Alternatively, you can introduce additional oxygen directly into the headspace via a micro-flow mass flow controller running at mere milliliters per minute.
Monitoring & Recording Bioreactor Gas Output
Applications like methane production or hydrogenation benefit from comparing the mass of gas added to the bioreactor with the mass that has been outgassed. User-selectable units of true mass and optional totalizer firmware make it easy to compare these numbers without the cumbersome conversions from standardized volumetric flow rates.
Alicat COMPOSER™ Gas Select / Mix Calibration Firmware allows you to correct the flow rate on the fly as gas concentrations change or send gas composition updates in real time from your gas analyzer. Even when outgassing occurs at atmospheric pressures, the very low pressure drop of Alicat’s Whisper Series MWBs will not induce backpressure while quantifying outgassed mass. When your output is markedly peaked, the wide operating range of all Alicat MFCs will let you capture both the peak flow rates and the leading or trailing edges when flow is almost nothing.
- One family of instruments from lab, to pilot, to production
- 10,000 to 1 controllable range reduces MFCs needed
- Gas Select reduces spare inventory
- Durably withstands ingress of liquids
- Low pressure drop models for working with small pressure differentials
- COMPOSER™ gas recipe system for matching outgassing compositions
- Profibus, Modbus, EtherCAT, EtherNet/IP, DeviceNet
- LabVIEW drivers
- Control pressure while measuring mass flow