{"id":38220,"date":"2024-02-12T20:01:00","date_gmt":"2024-02-12T20:01:00","guid":{"rendered":"https:\/\/www.alicat.com\/?post_type=article&#038;p=38220"},"modified":"2026-02-03T20:50:53","modified_gmt":"2026-02-03T20:50:53","slug":"anleitung-zum-entluften-ihres-flussigkeitsgerats","status":"publish","type":"support","link":"https:\/\/www.alicat.com\/de\/support\/bleeding-your-liquid-device-tutorial\/","title":{"rendered":"Anleitung zum Entl\u00fcften Ihres Fl\u00fcssigkeitsger\u00e4ts"},"content":{"rendered":"\n[et_pb_section fb_built=&#8221;1&#8243; _builder_version=&#8221;4.23.1&#8243; _module_preset=&#8221;default&#8221; global_colors_info=&#8221;{}&#8221; theme_builder_area=&#8221;post_content&#8221;][et_pb_row _builder_version=&#8221;4.23.1&#8243; _module_preset=&#8221;default&#8221; global_colors_info=&#8221;{}&#8221; theme_builder_area=&#8221;post_content&#8221;][et_pb_column type=&#8221;4_4&#8243; _builder_version=&#8221;4.23.1&#8243; _module_preset=&#8221;default&#8221; global_colors_info=&#8221;{}&#8221; theme_builder_area=&#8221;post_content&#8221;][et_pb_heading title=&#8221;Bleeding your liquid device tutorial&#8221; _builder_version=&#8221;4.23.1&#8243; _module_preset=&#8221;default&#8221; global_colors_info=&#8221;{}&#8221; theme_builder_area=&#8221;post_content&#8221;][\/et_pb_heading][et_pb_text _builder_version=&#8221;4.27.4&#8243; _module_preset=&#8221;default&#8221; global_colors_info=&#8221;{}&#8221; theme_builder_area=&#8221;post_content&#8221;]Alicat differential pressure based <a href=\"https:\/\/www.alicat.com\/products\/liquid-flow\/liquid-flow-meter\/\">liquid flow meters<\/a> and <a href=\"https:\/\/www.alicat.com\/products\/liquid-flow\/liquid-flow-controller\/\">liquid flow controllers<\/a> should only be used to flow liquids. Sometimes, however, a liquid contains trapped air or gas bubbles. It is critical that the device only measures the pressure of the gas-free liquid flowing through the device (no bubbles), or readings will be incorrect.\n\nEach liquid device is equipped with two bleed ports on the front, used to remove any trapped air or gas in the pockets near the sensor ports. <strong>Bleeding a port<\/strong> is the process of loosening the nylon screw slightly so the flowing liquid leaks and allows bubbles to escape.\n\nBelow are instructions on how to properly use the bleed ports on an Alicat device. <strong>Before you begin, ensure that the meter\/controller installation is secure, and add line pressure to the system. It is a good idea to have a towel handy to soak up any dripping liquid.<\/strong>\n\n<strong><\/strong>\n<div class=\"link-with-icons-wrap m-b\"><\/div>\n<div class=\"link-with-icons-wrap m-b\"><a href=\"https:\/\/www.alicat.com\/support\/liquid-in-a-gas-flow-instrument-faq\/\">Get liquid in a gas device? Check out this article instead<\/a><\/div>\n<h2><strong><\/strong><\/h2>\n<h2><strong>Video tutorial<\/strong><\/h2>\n<iframe title=\"Alicat Mass Flow Controller: How To - Bleed a Liquid Device\" width=\"1080\" height=\"608\" src=\"https:\/\/www.youtube.com\/embed\/n2Ie77YfXq8?feature=oembed&rel=0\"  allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen><\/iframe>[\/et_pb_text][et_pb_accordion _builder_version=&#8221;4.23.1&#8243; _module_preset=&#8221;default&#8221; global_colors_info=&#8221;{}&#8221; theme_builder_area=&#8221;post_content&#8221;][et_pb_accordion_item title=&#8221;Video transcript&#8221; open=&#8221;on&#8221; _builder_version=&#8221;4.23.1&#8243; _module_preset=&#8221;default&#8221; global_colors_info=&#8221;{}&#8221; theme_builder_area=&#8221;post_content&#8221;]<p><span data-contrast=\"auto\">\u201c<\/span><span data-contrast=\"auto\">Hi, my name is Marina and I\u2019m an app engineer at Alicat Scientific. Today, I\u2019m going to show you how to us<\/span><span data-contrast=\"auto\">e the bleed ports on your<\/span><span data-contrast=\"auto\">\u00a0liquid device. Let\u2019s get started.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Using the bleed ports on your Alicat liquid devices is important to remove any air bubbles that are in your liquid stream that could affect your flow readings. To do this, let\u2019s first start by either giving it a zero setpoint in the case of a controller, or plugging the downstream port in the case of a meter. We have a controller, so let\u2019s start by giving it a zero setpoint.<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">From the front panel, go to set point (top right button), click clear (bottom middle button), and set (bottom right button).\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Now let\u2019s apply some pressure to the inlet, around 20-30 PSIG for the best results.<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Now let\u2019s loosen that upstream bleed port. We want to do this slowly in order to prevent any liquid from spraying in unexpected directions. In addition, we\u2019re only loosening the port, not removing it completely.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Now, let\u2019s give the device at least a 50% setpoint. We\u2019ll go\u00a0<\/span><span data-contrast=\"auto\">to setpoint (top right button). You can see that our full scale is 1 CCM, so we want to give a setpoint of at least 0.5 CCM. In this case, let\u2019s go ahead and\u00a0<\/span><span data-contrast=\"auto\">just\u00a0<\/span><span data-contrast=\"auto\">give it a 100% setpoint.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Now, let it bleed for 15-20 seconds. While this is happening, tap the top of the device with the end of the screwdriver and wipe off any water that leaks out, like so.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Now, after that 15-20 seconds, let\u2019s close the bleed port. When you do this be careful to not over-tighten, as you can cause permanent damage if you do.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Now, let\u2019s give the device a zero setpoint (top right button).\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Now, we\u2019re essentially going to repeat those exact same steps but for the downstream port. We have our zero setpoint, and we still have our incoming inlet pressure of 20-30 PSIG.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Let\u2019s open the downstream bleed port, and give the device at least a 50% setpoint (top right button). Like before, let\u2019s just give a 100% setpoint.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Again let\u2019s let this bleed for 15-20 seconds while tapping the top of the<\/span><span data-contrast=\"auto\">\u00a0device with the end of the<\/span><span data-contrast=\"auto\">\u00a0screwdriver and wiping away any liquid that leaks out. Now close the bleed port and give a zero setpoint (top right button).\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">At this point,<\/span><span data-contrast=\"auto\">\u00a0we have completed bleeding out the liquid device to remove<\/span><span data-contrast=\"auto\">\u00a0any air bubbles, so the last thing we need to do is give your device a fresh tare. To do this, remove that inlet pressure we applied earlier so that the Alicat unit is in atmospheric conditions with no flow.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">Go to our menu (bottom right button) and tares (top right button). Click \u2018tare flow\u2019 (top right button). Now, you\u2019ll see a message telling you to ensure no flow before pressing tare. Now you can click tare. You\u2019ll see a warning message which is essentially saying what I just told you and click \u2018set\u2019<\/span><span data-contrast=\"auto\">\u00a0(bottom right button)<\/span><span data-contrast=\"auto\">.\u00a0<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>\n<p><span data-contrast=\"auto\">There you go, and that is how you use the ble<\/span><span data-contrast=\"auto\">ed ports on your liquid device.\u201d<\/span><span data-ccp-props=\"{&quot;201341983&quot;:0,&quot;335559739&quot;:160,&quot;335559740&quot;:259}\">\u00a0<\/span><\/p>[\/et_pb_accordion_item][\/et_pb_accordion][et_pb_text _builder_version=&#8221;4.23.1&#8243; _module_preset=&#8221;default&#8221; global_colors_info=&#8221;{}&#8221; theme_builder_area=&#8221;post_content&#8221;]<h2>Step-by-step instructions<\/h2>\n<ol>\n<li>For controllers, give the device &gt;50% setpoint.\u00a0 For meters, make sure line pressure is applied.<\/li>\n<li>Loosen the upstream bleed port (if the device is mounted horizontally and facing towards you, this will be on the left-hand side) by turning the screw 1-2 turns slowly. If you loosen the screw too quickly, you can get a stream of water rush out of the device that can spray in unpredictable directions.<\/li>\n<li>Tap the flow body of the device gently to add some manual force in removing any bubbles.<\/li>\n<li>Allow the water to drip for about 15 seconds.<\/li>\n<li>Tighten the screw until the bleeding stops. Be careful to avoid over-tightening the screw, which can damage the tip of the nylon screw.<\/li>\n<li>Repeat these steps with the second bleed port.<\/li>\n<\/ol>[\/et_pb_text][\/et_pb_column][\/et_pb_row][\/et_pb_section]\n","protected":false},"featured_media":46458,"parent":0,"template":"","meta":{"_acf_changed":false,"_et_pb_use_builder":"on","_et_pb_old_content":"","_et_gb_content_width":"1920","content-type":"","_searchwp_excluded":""},"categories":[],"class_list":["post-38220","support","type-support","status-publish","has-post-thumbnail","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.3 (Yoast SEO v27.3) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Bleeding Your Liquid Device Tutorial - Alicat Scientific<\/title>\n<meta name=\"description\" content=\"Each liquid device is equipped with two bleed ports on the front, used to remove any trapped air or gas in the pockets near the sensor ports. Bleeding a port is the process of loosening the nylon screw slightly so the flowing liquid leaks and allows bubbles to escape.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.alicat.com\/de\/unterstutzung\/anleitung-zum-entluften-ihres-flussigkeitsgerats\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Bleeding Your Liquid Device Tutorial\" \/>\n<meta property=\"og:description\" content=\"Each liquid device is equipped with two bleed ports on the front, used to remove any trapped air or gas in the pockets near the sensor ports. Bleeding a port is the process of loosening the nylon screw slightly so the flowing liquid leaks and allows bubbles to escape.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.alicat.com\/de\/unterstutzung\/anleitung-zum-entluften-ihres-flussigkeitsgerats\/\" \/>\n<meta property=\"og:site_name\" content=\"Alicat Scientific\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/alicatscientific\/\" \/>\n<meta property=\"article:modified_time\" content=\"2026-02-03T20:50:53+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.alicat.com\/wp-content\/uploads\/2026\/01\/featured-alicat.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"630\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"4\u00a0Minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.alicat.com\\\/support\\\/bleeding-your-liquid-device-tutorial\\\/\",\"url\":\"https:\\\/\\\/www.alicat.com\\\/support\\\/bleeding-your-liquid-device-tutorial\\\/\",\"name\":\"Bleeding Your Liquid Device Tutorial - Alicat Scientific\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.alicat.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.alicat.com\\\/support\\\/bleeding-your-liquid-device-tutorial\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.alicat.com\\\/support\\\/bleeding-your-liquid-device-tutorial\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.alicat.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/featured-alicat.png\",\"datePublished\":\"2024-02-12T20:01:00+00:00\",\"dateModified\":\"2026-02-03T20:50:53+00:00\",\"description\":\"Each liquid device is equipped with two bleed ports on the front, used to remove any trapped air or gas in the pockets near the sensor ports. Bleeding a port is the process of loosening the nylon screw slightly so the flowing liquid leaks and allows bubbles to escape.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.alicat.com\\\/support\\\/bleeding-your-liquid-device-tutorial\\\/#breadcrumb\"},\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.alicat.com\\\/support\\\/bleeding-your-liquid-device-tutorial\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/www.alicat.com\\\/support\\\/bleeding-your-liquid-device-tutorial\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.alicat.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/featured-alicat.png\",\"contentUrl\":\"https:\\\/\\\/www.alicat.com\\\/wp-content\\\/uploads\\\/2026\\\/01\\\/featured-alicat.png\",\"width\":1200,\"height\":630,\"caption\":\"Photo of an Alicat instrument with the Alicat logo behind it\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.alicat.com\\\/support\\\/bleeding-your-liquid-device-tutorial\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.alicat.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Bleeding Your Liquid Device Tutorial\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.alicat.com\\\/#website\",\"url\":\"https:\\\/\\\/www.alicat.com\\\/\",\"name\":\"Alicat Scientific\",\"description\":\"Alicat Scientific | Fastest Flow Measurement Possible\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.alicat.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.alicat.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"de\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.alicat.com\\\/#organization\",\"name\":\"Alicat Scientific\",\"alternateName\":\"Alicat\",\"url\":\"https:\\\/\\\/www.alicat.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/www.alicat.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"\",\"contentUrl\":\"\",\"caption\":\"Alicat Scientific\"},\"image\":{\"@id\":\"https:\\\/\\\/www.alicat.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/alicatscientific\\\/\",\"https:\\\/\\\/linkedin.com\\\/company\\\/alicat-scientific-inc\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCPPX4sBOO2eEu65Zn-EfwCw\"],\"email\":\"info@alicat.com\",\"telephone\":\"+18882906060\",\"legalName\":\"Alicat Scientific, Inc.\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Tutorial zur Entl\u00fcftung Ihres Fl\u00fcssigkeitsger\u00e4ts - Alicat Scientific","description":"Jedes Fl\u00fcssigkeitsmessger\u00e4t ist mit zwei Entl\u00fcftungs\u00f6ffnungen an der Vorderseite ausgestattet, die dazu dienen, eingeschlossene Luft oder Gas in den Taschen in der N\u00e4he der Sensoranschl\u00fcsse zu entfernen. Beim Entl\u00fcften eines Anschlusses wird die Nylonschraube leicht gelockert, so dass die flie\u00dfende Fl\u00fcssigkeit entweicht und Blasen entweichen k\u00f6nnen.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.alicat.com\/de\/unterstutzung\/anleitung-zum-entluften-ihres-flussigkeitsgerats\/","og_locale":"de_DE","og_type":"article","og_title":"Bleeding Your Liquid Device Tutorial","og_description":"Each liquid device is equipped with two bleed ports on the front, used to remove any trapped air or gas in the pockets near the sensor ports. Bleeding a port is the process of loosening the nylon screw slightly so the flowing liquid leaks and allows bubbles to escape.","og_url":"https:\/\/www.alicat.com\/de\/unterstutzung\/anleitung-zum-entluften-ihres-flussigkeitsgerats\/","og_site_name":"Alicat Scientific","article_publisher":"https:\/\/www.facebook.com\/alicatscientific\/","article_modified_time":"2026-02-03T20:50:53+00:00","og_image":[{"width":1200,"height":630,"url":"https:\/\/www.alicat.com\/wp-content\/uploads\/2026\/01\/featured-alicat.png","type":"image\/png"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"4\u00a0Minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.alicat.com\/support\/bleeding-your-liquid-device-tutorial\/","url":"https:\/\/www.alicat.com\/support\/bleeding-your-liquid-device-tutorial\/","name":"Tutorial zur Entl\u00fcftung Ihres Fl\u00fcssigkeitsger\u00e4ts - Alicat Scientific","isPartOf":{"@id":"https:\/\/www.alicat.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.alicat.com\/support\/bleeding-your-liquid-device-tutorial\/#primaryimage"},"image":{"@id":"https:\/\/www.alicat.com\/support\/bleeding-your-liquid-device-tutorial\/#primaryimage"},"thumbnailUrl":"https:\/\/www.alicat.com\/wp-content\/uploads\/2026\/01\/featured-alicat.png","datePublished":"2024-02-12T20:01:00+00:00","dateModified":"2026-02-03T20:50:53+00:00","description":"Jedes Fl\u00fcssigkeitsmessger\u00e4t ist mit zwei Entl\u00fcftungs\u00f6ffnungen an der Vorderseite ausgestattet, die dazu dienen, eingeschlossene Luft oder Gas in den Taschen in der N\u00e4he der Sensoranschl\u00fcsse zu entfernen. Beim Entl\u00fcften eines Anschlusses wird die Nylonschraube leicht gelockert, so dass die flie\u00dfende Fl\u00fcssigkeit entweicht und Blasen entweichen k\u00f6nnen.","breadcrumb":{"@id":"https:\/\/www.alicat.com\/support\/bleeding-your-liquid-device-tutorial\/#breadcrumb"},"inLanguage":"de","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.alicat.com\/support\/bleeding-your-liquid-device-tutorial\/"]}]},{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/www.alicat.com\/support\/bleeding-your-liquid-device-tutorial\/#primaryimage","url":"https:\/\/www.alicat.com\/wp-content\/uploads\/2026\/01\/featured-alicat.png","contentUrl":"https:\/\/www.alicat.com\/wp-content\/uploads\/2026\/01\/featured-alicat.png","width":1200,"height":630,"caption":"Photo of an Alicat instrument with the Alicat logo behind it"},{"@type":"BreadcrumbList","@id":"https:\/\/www.alicat.com\/support\/bleeding-your-liquid-device-tutorial\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.alicat.com\/"},{"@type":"ListItem","position":2,"name":"Bleeding Your Liquid Device Tutorial"}]},{"@type":"WebSite","@id":"https:\/\/www.alicat.com\/#website","url":"https:\/\/www.alicat.com\/","name":"Alicat Scientific","description":"Alicat Scientific | Schnellstm\u00f6gliche Durchflussmessung","publisher":{"@id":"https:\/\/www.alicat.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.alicat.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de"},{"@type":"Organization","@id":"https:\/\/www.alicat.com\/#organization","name":"Alicat Scientific","alternateName":"Alicat","url":"https:\/\/www.alicat.com\/","logo":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/www.alicat.com\/#\/schema\/logo\/image\/","url":"","contentUrl":"","caption":"Alicat Scientific"},"image":{"@id":"https:\/\/www.alicat.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/alicatscientific\/","https:\/\/linkedin.com\/company\/alicat-scientific-inc","https:\/\/www.youtube.com\/channel\/UCPPX4sBOO2eEu65Zn-EfwCw"],"email":"info@alicat.com","telephone":"+18882906060","legalName":"Alicat Scientific, Inc."}]}},"_links":{"self":[{"href":"https:\/\/www.alicat.com\/de\/wp-json\/wp\/v2\/support\/38220","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.alicat.com\/de\/wp-json\/wp\/v2\/support"}],"about":[{"href":"https:\/\/www.alicat.com\/de\/wp-json\/wp\/v2\/types\/support"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.alicat.com\/de\/wp-json\/wp\/v2\/media\/46458"}],"wp:attachment":[{"href":"https:\/\/www.alicat.com\/de\/wp-json\/wp\/v2\/media?parent=38220"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.alicat.com\/de\/wp-json\/wp\/v2\/categories?post=38220"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}